How to Restore Powder Coated Patio Furniture
Powder coating is one of the best means of extending the life of your patio furniture. However, even powder coated furniture may begin to show some wear and tear after years of exposure to the Nevada heat and sun. Fortunately, you can easily transform your outdoor tables and chairs by seeking the services of a skilled powder coating specialist. An expert in the powder coating industry can help you restore your powder coated patio furniture to like new condition by always following the seven tips below.
What are some tips to remember when restoring powder coated furniture?
The key to successfully restoring your powder coated furniture is to use the proper tools and pre-treatment measures. Making sure that your furniture is intact and clean before you get started can help prevent pinholes, poor adhesion, and other common powder coating flaws. By selecting a powder coating company that follows the seven tips below, you can help ensure that you are satisfied with your results.
Tip #1: Inspect your furniture for damage
Before diving into the powder coating process, your furniture should receive a full inspection for signs of damage. Any rust should be carefully removed with a wire brush and any loose welds should be repaired. Then, any missing parts should be replaced to ensure your furniture is intact.
Tip #2: Clean and dry your furniture before powder coating
Attempting to apply powder coating to a dirty surface can lead to an uneven finish and impede adhesion. A professional powder coating company will apply a gentle cleaning solution to your furniture with a soft cloth or brush. Then, after rinsing the furniture, they will ensure that your furniture dries completely before moving forward with the restoration process
Tip #3: Invest in the latest cutting edge powder coating equipment
State of the art powder coating tools can make a world of difference in your furniture’s appearance. While you may have thought about buying a DIY powder coating kit, the end results cannot compare to those produced with industrial grade powder coating tools. For ideal results, your patio furniture should be treated with professional spray guns in a well-ventilated powder coating booth. Curing ovens should be spacious enough to accommodate your furniture and there should be plenty of space and hangers to ensure proper drying.
Tip #4: Ensure adequate ventilation and air quality
Poor compressed air quality is the cause of many of the problems with the powder coating process. When compressed air contains dirt, oil, or moisture, the powder coating process is impeded and an uneven finish can result. The best powder coating companies continually monitor their compressed air through regular inspections, audits, and replacement of filters and other consumables.
Tip #5: Adhere to recommended curing temperatures and times
“The curing process for powder coating is normally done in a special oven; the coating has to be exposed to a temperature range of 350 to 400 degrees Fahrenheit (160 to 210 degrees Celsius) for 20 minutes.”
Overcuring and undercuring are two of the most common mistakes made during the powder coating process. Improper cure conditions can lead to problems such as low impact resistance, poor hardness, and a coating’s lack of adhesion to your furniture. An experienced restoration company will be vigilant in monitoring oven curing temperatures and cure times in order to avoid these pitfalls.
Tip #6: Invest in durable racks
Another common error among novice powder coaters is to skimp on powder coating racks. By holding your furniture components at the proper angle, a durable rack can help you complete your project faster and more accurately. While you do not necessarily need a large rack for a modest patio set, you need to make sure that you choose a sturdy, well-designed rack designed by an established manufacturer.
Tip #7: Consider new slats and cushions to show off your furniture
Putting your old worn accessories back on a freshly powder coated chair is like putting dirty sheets on a brand new mattress. Once your furniture has been fully restored and you are pleased with your results, consider replacing your old cushions or slats with new accessories. By updating your furniture accessories, a decade-old patio set can truly look like new!
What is the best path to restoring your powder coated patio furniture?
As outlined above, there are many steps to follow to ensure that your powder coated furniture is restored to like new condition. While you might be tempted to buy a DIY powder coating kit and try to restore your patio furniture on your own, the lack of professional tools and conditions will leave your furniture at increased risk for exposure to dirt, debris, and extreme temperatures. These can all lead to imperfections and unsatisfactory results.
The single best way to achieve the highest quality results is to seek the services of a trusted powder coating provider in Nevada. An experienced powder coating company will have the cutting-edge tools and skilled powder coating technicians that are needed to produce the flawless finish that you are seeking. And because you will not have to spend money on equipment and supplies, you will end up spending less money to restore your furniture.
Your trusted solution for professional powder coating restoration
Not all powder coating providers are created equal. Choosing an experienced company is essential to ensuring that you are satisfied with results. We invite you to contact us at AR Powder Coating to discover how we can help you professionally restore your powder-coated metal furniture to its brand new condition. Here are a few of the many reasons why we are Nevada’s most trusted provider of powder coating services:
- Secure Facilities: We use a climate-controlled powder coating booth to shield your furniture from dirt and debris
- Skilled Technicians: Our skilled technicians will use a state-of-the-art powder spray system to evenly apply the perfect amount of powder
- Precise color matching: We can match your powder coating to the color of your existing furniture or use the color of your choice
When you choose AR Powder Coating to restore your furniture, you can expect your patio furniture to like new and exceed your expectations. We look forward to helping you enhance your patio furniture with our impressive powder coating process!
