In this post, we’ll break down the causes of outgassing and pinholes while powder coating, and go over some of the ways that AR Powder Coating

Yes we have certified applicators from both PCI (The Powder Coating Institute) and CCAI (Chemical Coaters Association). Our coaters have been trained on pretreatment applications, faraday

99.9% of any successful coating requires excellent pretreatment. The cleaner the material, the better success you will have achieving adhesion, smoothness and longevity. Powder coatings can

AR’s powder coatings of parts include masking and plugging threaded holes. Custom masking is extra. All parts should be clean of any grease, rubber, gaskets, or

Yes we offer pickup and delivery. AR has trucks ranging from 13′, 16′ and 20′ flat beds capable of pick up and delivery of any size

Powder coating has less expense in raw materials because there are no solvents that are needed to achieve the coatings. Also because the powder is electrostatically

We offer both batch and conveyer coatings. Batch coatings are what is used for smaller part runs. AR’s Batch part capabilities are 12′ Wide x12′ Tall

Media Blast cleaning removes surface contaminants from the parts by the use of high-pressure air with a mechanical abrasive. Media blasting is the most superior way

Coating over rust, scale (oxide layer formed on steel during the hot roll mill processing) or any corrosion can create future issues of delamination, peeling and

Unlike liquid coatings, powder coatings are more corrosion resistant to the elements. Pretreatment is vital to any coating process. Our coatings go through many different process’s